ACASIS NVMe M.2 Duplicator Dual-Bay Offline Clone USB C to NVME Docking Station for M2 SSD M Key Hard Drives Enclosure [Support 8TB]

40% OFF


YOU SAVE $60.00 $60.00
See this Offline Clone on Amazon Get more Coupons up to 100% for Electronics

Note: You have to register with to be able to claim a coupon for Offline Clone.

NVMe Cloner NVMe Enclosure NVMe&NGFF Dock Macbook Enclosure NVMe&NGFF Enclosure Compatibility M Key & (M+B) Key M Key & (M+B) Key M Key & (M+B) Key iMAC M Key & (M+B) Key USB Interface USB3.2 Gen2 USB3.2 Gen2 USB3.2 Gen2 USB3.2 Gen1 USB3.2 Gen2 Transmission Speed 10Gbps 10Gbps 10Gbps 5Gbps 10Gbps Material Aluminum Aluminum Aluminum Aluminum Aluminum Max HDD Capacity 8TB 8TB 8TB 8TB 8TB It does clone Nvme Drives

Acasis USB 3.1 Gen2 10Gbps Dual-Bay NVME Docking Station,Lay-Flat External Hard Drive Docking Station for M2 SSD Key M, Support Offline Clone Function and Tool-Free Installation.

Provides Ultra-fast access for reading and writing on up to 2 Solid State Drive simultaneously. Offers faster read (992MB/S) /write (952.4MB/S) data speeds to and from M.2 NVMe SSD.

You will never regret to have one.

SSD whole copy function without PC

SSD copying (cloning) is possible at the push of a button without using a personal computer.

To access NVME with a PC: Once you attach power and Type-C USB, you're ready to go. Carefully insert the NVME SSD into the slot(s) of your choice and push the power button on the back of the dock. Wait a few seconds, and the dock should enumerate in Windows. Depending on the state of the SSD, you'll either need to go to Drive Manager to initialize and format the SSD's, or they could just pop-up in Explorer, ready to use.

For Standalone Duplication: Plug the target SSD into Slot B (the front of the dock, closest to the clone button), and plug the source SSD into slot A (the end were the power adapter connects). Target SSD capacity must be Larger than Source SSD capacity. Press and hold the power button for 3-5 seconds to begin the clone process. LED's on the front top of the dock indicate clone progress - 25%, 50%, 75% and 100%.

please note:

1. Do not connect to the computer during use.

2. SSD condition: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.

3. Make sure that the two SSD disks can be recognized on the computer when plug in our nvme enclosure.If not, it could not clone.

Three Steps for Offline NVMe M.2 Duplicator Step 1

1,Before cloning, disconnect the USB cable from the device.

2,Plug the source M2.NVME SSD in Slot A and the target M2.NVME SSD in Slot B.


Not support SATA SSDs.

The capacity of Target SSD needs Larger than the source SSD.


Step 2

1,Connect the power adapter to the enclosure

2, Press the power button.

3, Hold the clone button for 3-5 seconds until LED indicator begins to flash.

Step 3

The LED indicators show the cloning process from 25%,50%,75% and 100%.

When all four LEDs stop flashing, the cloning is finished. This process may take a long time which mainly depends on the capacity of SSD.

Read more Wide Compatibility

ACASIS NVMe enclosure support NVMe M.2 M / B&M Key SSDs in sizes: 2230/2242/2260/2280.

Compatible with multiple operating systems, such as Windows, macOS and Linux.

Reliable Performance

This product provides instant access to your M.2 NVMe SSD at reliable speeds. According to the Acasis Lab, R/W speeds can reach up to 1041MB/S and1034MB/S respectively.

Compact, freestanding design making dissipates heat and exhaust efficiently, aluminum construction protects the drive from overheating and reduces vibration.

● Make sure the small fine pitch connectors don't get contamination in them and check them before inserting an SSD!

● Ensure very careful insertion and removal into the slots, and only when the power is off!

● Don't tilt or bend your SSD's during insertion or removal and never force them into the slots!

Read more Why do four clone indicators remain off after pressing the clone button?

Sorry for the inconvenience. Please kindly check if the enclosure is connected to a device. If so, this button will not work. It just support offline clone. Plug the two nvme SSD in right place then connect the power adapter, click clone button,then will start clone.

After cloning started, 25% clone indicator was on but source/target SSD indicators are off.

Hi friend,

Thank you for your question. Please make sure the capacity of the target SSD needs to be larger than the source SSD or it won't clone successfully.

Will it get hot during the use?

The shell of this enclosure is made of aluminum alloy, which will dissipate the heat effectively. If the shell gets hot during the use, that means the heat of the SSD(s) has been transferred for better protection, which is a normal phenomenon.

Can I use with only a slot of this enclosure?

Yes, you can use a single slot for data transfer and storage of an NVMe SSD. Of course, you can also use 2 slots for this function on 2 NVMe SSDs.

See what our users are saying!



















You'd like to get access to hundreds of deals?

Join tens of thousands of smart and happy shoppers! What are you waiting for?

Sign Up Now!

Discover more deals...

No deals available yet.

So, what are you waiting for?

Sign Up Now!
Trusted Marketplaces

Be part of RebateKey

Join tens of thousands of smart and happy shoppers! What are you waiting for?

Start Now!